High Flow Inhaler Compressor Nebulizer

Introduction

-A device for administering medication by producing aerosol. Also known as an atomizer, the device vaporizes the liquid medication into a fine mist to be inhaled into the lungs via a mouthpiece or mask.

-A nebulizer is used to administer medication primarily for those with asthma, but also for those with cystic fibrosis or other respiratory illnesses.

Main Features

【Breath-Enhanced Design】 Features a breath-enhanced nebulizer system designed to support shorter nebulization sessions.

【Low-Noise Operation】 Piston compressor design with an operating noise level below 55 dB.

【6 mL Medication Cup】 Equipped with a 6 mL medication cup for aerosol generation using compressed air.

【One-Button Control】 Simple operation with an easy-to-use design and accessible controls.

【Complete Accessory Set】 Includes adult and child masks, air tubing, air-transfer accessories, and five replacement air filters.

The basic steps to set up and use your nebulizer are as follows:

1. Wash your hands well.
2. Connect the hose to an air compressor.
3. Fill the medicine cup with your prescription. To avoid spills, close the medicine cup tightly and always hold the mouthpiece straight up and down.
4. Attach the hose and mouthpiece to the medicine cup.
5. Place the mouthpiece in your mouth. Keep your lips firm around the mouthpiece so that all of the medicine goes into your lungs.
6. Breathe through your mouth until all the medicine is used. This takes 10 to 15 minutes. If needed, use a nose clip so that you breathe only through your mouth. Small children usually do
7. better if they wear a mask.
8. Turn off the machine when done.
9. Wash the medicine cup and mouthpiece with water and air dry until your next treatment.

Main Performance

Instrument classification: Class II

Certificate: Medical CE, CE, ISO13485, ISO9001, RoHs

Type: Piston Compressor Nebulizer

Properties: Rehabilitation Therapy Supplies

Noise Level: Below 55 dB

Input: <=180VA

Warranty: 12 Months

Power Supplier: AC 110V/60HZ, 220V/50HZ-60HZ,230V/50HZ

Packaging & Delivery

Single package size: 28cmx18cmx9.8cm
Single gross weight: 2.1KGS
Package Type: Packing with carton.
Accessory:
-Standard accessories: 
1* Neb bottle: 6ml 
1* Air tube 
2* Masks: 1 Adult & 1 Child sizes 
2*Air transfers 
5*Air filters 
-Optional accessories: 
Additional sets of the standard accessories 
Big and flexible air tube
Bag for stories the nebulizer

Frequently Asked Questions

1. How should the breath-enhanced design be evaluated before placing a distribution order?

The JH-102 features a breath-enhanced nebulizer design intended to support shorter nebulization sessions. It combines this design with a 6 mL medication cup and one-button operation. During sample evaluation, purchasing teams can compare the nebulization process under consistent liquid volumes and accessory configurations. The breath-enhanced feature should be distinguished from a guaranteed treatment duration, which depends on the actual operating conditions.

2. What noise specification should be included in batch acceptance requirements?

The JH-102 is a piston compressor nebulizer with an operating noise level below 55 dB. For batch inspection, this value can serve as the declared noise-performance requirement. Measurements should be carried out under consistent test conditions, including microphone distance and operating setup, to make results comparable between sample units and delivered batches.

3. Can one electrical configuration be supplied to both 110V and 230V markets?

The JH-102 is available in AC 110V/60Hz, 220V/50–60Hz, and 230V/50Hz power configurations, with input power rated at ≤180VA. These are available electrical specifications rather than confirmation that every unit automatically switches between voltages. For export procurement, the order should identify the required voltage, frequency, and plug configuration for each destination market.

4. How can the standard accessory kit be adapted for different distribution requirements?

The standard JH-102 kit includes a 6 mL nebulizer bottle, one air tube, an adult mask, a child mask, two air-transfer accessories, and five air filters. Optional accessories include additional standard accessory sets, a larger flexible air tube, and a storage bag. These options allow different accessory packages to be arranged around the same compressor model without changing the main unit.

5. What maintenance supplies and warranty coverage should be planned for ongoing distribution?

Each standard kit contains five air filters, providing an initial supply of replacement filtration materials. Additional sets of standard accessories are also offered, allowing replacement requirements to be included in subsequent purchasing arrangements. The JH-102 comes with a 12-month warranty. These details can be used to plan initial maintenance supplies and establish after-sales service terms for distributed units.

6. What customization options and lead times are available for private-label orders?

The JH-102 supports logo and color customization for private-label distribution. The estimated lead time is 30–45 days, depending on order specifications and customization requirements. Buyers can confirm the branding details, packaging requirements, and delivery schedule before production to ensure the finished products meet their distribution needs.